Foto kan afwijken van werkelijk product
|
|
|
|
|
|
Accessoires
Transparently connect fiber to copper to power PoE+ devices at the edge of your network. Use the Converter to connect PoE+ devices such as PTZ (pan, tilt, zoom) cameras, 802.11n access points, VoIP phones, and more that require up to 30 watts of power.
The Converter acts as a Power Sourcing Equipment (PSE) to push data and power over copper cable to the remote, Powered Devices (PDs). The Media Converter features one autosensing 10/100/1000-BASE-T UTP port plus an SFP port that can be used for multimode and single-mode 1000BASE-X fiber connections.
It is powered via an external AC adapter, which delivers 47~57 input power voltage. The Converter features advanced functions such as auto-negotiation, Auto-MDIX, Link Lost Forwarding, and Link Fault Pass-Through for easy system management and troubleshooting. LEDs indicate Converter activity.
Approvals — FCC Class A, CE
Standards — IEEE 802.3 10BASE-T; IEEE 802.3u 100BASE-TX; IEEE 802.3ab 1000BASE-T: IEEE 802.3z 1000BASE-SX/LX: IEEE 802.3at PoE+
Controls — (1) DIP switch: ON: LLP/LFP enable; OFF: LLF/LFP disable
Connectors — 1 RJ45 (10/100/1000BASE-T, 802.3at), 1 SFP port, 1000BASE-X
Indicators —
Power LED: ON when DC power is connected;
SFP Link/Act LED: ON when there is activity on the SFP link;
PSE: ON when a Powered Device (PD) is connected;
100M/ACT: ON when port is running at 100M speed and activity;
1000M/ACT: OFF when port is
Power —
External power adapter included;
Input: 100-240 VAC, 50-60 Hz, 0.8 A max.;
Output: 48 VDC, 0.8 A;
Consumption: 33 Watts maximum;
PoE+ output: 802.3at, up to 30 W
Environmental —
Temperature: Operating: 0 to 45° C; Storage: -20 to +85° C
Humidity: 10 to 90% relative, non-condensing
Dimensions — 2.2H x 7.4W x 10.2D cm
Weight — 0.24 kg
Note: This product is covered by one of more of the following: United States Patent Nos. 7,457,250; 8,902,760; and/or 9,019,838.
|
|
Acties
Manuals
Recently viewed products:
Recent bekeken pagina's:
|