MCX Gen2 DisplayPort Transcoder - 4K60, 10G Copper or Fiber, HDMI and DisplayPort A/V Input

The TAA-compliant MCX Gen2 DisplayPort Transcoder is an ideal solution for point-to-point secure video conferencing, hotel or convention center displays, multi-monitor broadcasts, distributed video matrix or video wall systems, and remote KVM system control. The transcoder brings all the features of MCX Gen2 encoders and decoders into a single solution, allowing you to configure it for use as either an encoder or decoder and to utilize it in either your 10G Cat6A copper or SFP+ Fiber networking environment. It features a DisplayPort output to provide 4K60 4:4:4 UHD video via a secure latching connector while allowing for either HDMI or DisplayPort inputs. It provides for a complete A/V over IP Distribution solution, transmitting and switching video, audio, IR, RS-232, and USB 2.0 signals throughout your system.

Easy Setup and Management
Connect a transcoder to an AV source (e.g. computer, content player) and to a managed 10-GbE network switch. Connect a transcoder to each screen you want to display the content on and connect it to the same switch. Through the user-friendly MCX Gen2 Controller, you can configure your system and build and manage a video wall. Transcoders can be connected point-to-point for extension-only applications.

Uncompressed 4K 60 Hz 4:4:4 Video
Extend and distribute uncompressed 4K 60 Hz 4:4:4 video to an unlimited number of displays without sacrificing latency, video quality, or bandwidth.

Create Ergonomic Workflows for Operators and Configure as Copper or Fiber
Front-panel configuration buttons and On-Screen Display (OSD) streamline daily workflows.

Zero Latency
High-quality, IP routable, AV extension yields real-time (0.03 milliseconds) glass-to-glass encoding and decoding.

Back USB-B for Encoder or Front 3-Port USB for Decoder
Configure the integrated USB hub of each transcoder for multi-user, control room, or on-demand installations.

Additional Video Out
When used as an Encoder, the local DisplayPort output allows you to view the input source on a separate monitor, sample the video on a loop, then pass it to the network to compare latency.

Works with Optional MCX Gen2 Controller or Control Software
Combine multiple transcoders with one or more 10-Gigabit fiber Ethernet switches to form a distributed video matrix, a multi-viewer system, or a video wall.

Compliance — TAA, RoHS, CE
Operating Humidity — 20 – 90% RH (Non-condensing)
Operating Temperature — 32 to 104˚F (0 to 40˚C)
Power — 12V/3A DC
Power Consumption — 14.3 W
Resolution — 720 × 400p@70/85, 640 × 480p@60/72/75/85, 720 × 480i@60, 720 × 480p@60, 720 × 576i@50, 720 × 576p@50, 800 × 600p@56/60/72/75/85, 848 × 480p@60, 1024 × 768p@60/70/75/85, 1152 × 864p@75, 1280 × 720p@50/60, 1280 × 768p@60/75/85, 1280 × 800p@60/75/85, 1280 × 960p@60/85, 1280 × 1024p@60/75/85, 1360 × 768p@60, 1366 × 768p@60, 1400 × 1050p@60, 1440 × 900p@60/75, 1600 × 900p@60RB, 1600 × 1200p@60, 1680 × 1050p@60, 1920 × 1080i@50/60, 1920 × 1080p@24/25/30, 1920 × 1080p@50/60, 1920 × 1200p@60RB, 2560 × 1440p@60RB, 2560 × 1600p@60RB, 2048 × 1080p@24/25/30, 2048 × 1080p@50/60, 3840 × 2160p@24/25/30, 3840 × 2160p@50/60, 3840 × 2160p@24, 3840 × 2160p@50/60, 4096 × 2160p@24/25/30, 4096 × 2160p@24, 4096 × 2160p@50/60, 4096 × 2160p@50/60
Storage Temperature — -4˚F to +140˚F (-20 to +60˚C)
100GBE Bandwidth — 10 Gbps
IR Frequency — 38kHz
Baud Rate — 57600 (Default), up to 115200 bps
Connectors —
Input Ports: (1) DisplayPort; (1) HDMI Type-A;
Output Ports: (1) DisplayPort ;
Bi-Directional Port: (1) Stereo Audio (3.5mm);
Pass-Through Ports:
(1) 10GbE LAN (RJ-45 or SFP+);
(2) IR (3.5mm);
(1) RS-232 (3-pin Terminal Block);
(1) LAN (RJ-45);
(3) USB 2.0 (Type-A) ;
(1) USB 2.0 (Type-B)
Dimensions — 9.1" x 1" x 4.6" (231.5 x 25 x 116.7mm)
Weight — 0.916Kg

(1) UHD+ Copper/Fiber Transcoder
(1) 12-V/3-A DC Power Adapter
(1) Power Cord
(1) IR Emitter
(1) IR Receiver
(1) 3-PIN Terminal Block