Emerald® Fiber Network Switch - 1G, 24-Port

Maximize Your Emerald KVM System
To get the most out of your Emerald® solution, you need to have the right networking equipment in place. The Emerald 24-Port Fiber Network Switch is a power-efficient and resilient Gigabit Ethernet switch designed to optimize the performance of your Emerald system. It features integrated 10-Gbe uplinks for advanced Layer 3 distribution. This switch offers a non-blocking architecture that allows it to handle unexpected traffic loads. On top of all that, the Emerald Network Switch provides performance assurance with a data rate of up to 212 Gbps and a forwarding rate of up to 158 Mbps.

Improve Network Reliability
This Emerald network switch is perfect for critical applications that cannot experience any downtime. Use the switch with dual internal hot-swappable 80PLUS-certified power supplies for high availability and power efficiency.

Simple Management and Scalability
The Emerald 24-Port Fiber Network Switch offers simple management and scalability via an 84-Gbps stacking architecture. You can manage up to 12 switches from a single IP address with ease.

Features the Latest Standard Protocols
This switch offers the latest open-standard protocols and can interface with Cisco protocol PVST+. It also supports Dell Networking OS9, VLT, and network virtualization features.

General -
CE Approval: Yes
Compliance: Safety UL/CSA/EN 60950-1 second edition
Emissions : FCC CFR 47 Part 15, Subpart B:2011, Class A
Immunity:
EN 300 386 V1.4.1:2008 EMC for Network Equipment
EN 55024: 1998 + A1: 2001 + A2: 2003
EN 61000-3-2: Harmonic Current Emissions
EN 61000-3-3: Voltage Fluctuations and Flicker
EN 61000-4-2: ESD
EN 61000-4-3: Radiated Immunity
EN 61000-4-4: EFT
EN 61000-4-5: Surge
EN 61000-4-6: Low Frequency Conducted Immunity
Connectors -
(24) 1000-SX or 1000-LX SFP GbE ports;
(2) SFP+ ports, 2x GbE combo media ports;
(1) port RS232 console (RJ45);
(1) port 10/100/1000BASE-T management;
(1) USB 2.0 type A storage port;
(2) rear stacking ports (21Gbps) supporting up to 84Gbps (full- duplex)
Network Management -
SNMPv1/2/3
SSHv2
FTP, TFTP, SCP
Syslog
Port Mirroring
RADIUS
802.1X
Support Assist (Phone Home)
sFlow
Operating Humidity - 5 to 95% (RH), non-condensing
Operating Temperature - 0° to 45°C
Performance -
MAC addresses: up to 80k;
IPv4 routes: 16K;
IPv6 routes: 8K (shared CAM space with IPv4);
Switch fabric capacity: 212Gbps (full-duplex);
Forwarding capacity: 158 Mpps;
Link aggregation: 16 links per group, 128 groups per stack;
Queues per port: 8 queues;
Layer 2 VLANs: 4K;
MSTP: 64 instances;
VRF-lite: 511 instances;
Line-rate Layer 2 switching: all protocols, including IPv4 and IPv6;
Line-rate Layer 3 routing: IPv4 and IPv6;
IPv4 host table size: up to 22k max;
IPv6 host table size 16K;
IPv4 Multicast table size 8K;
LAG load balancing: based on Layer 2, IPv4 or IPv6 headers;
Latency 3.7 μsec for 1000BASE-T, ~1.8 μsec for SFP+;
Packet buffer memory: 4MB;
CPU memory: 1GB
Power - [b]
100–240 VAC 50/60 Hz 200 W hot swappable power supplies (one supply included)
Power: 200W
[b]QoS -
Access Control Lists
Prefix List
Route-Map
Rate Shaping (Egress)
Rate Policing (Ingress)
Scheduling Algorithms

• Round Robin
• Weighted Round Robin
• Deficit Round Robin
• Strict Priority

Weighted Random Early Detect
Safety -
UL/CSA 60950-1, Second Edition
EN 60950-1, Second Edition
IEC 60950-1, Second Edition Including All National Deviations and Group Differences
EN 60825-1 Safety of Laser Products Part 1: Equipment Classification Requirements and User’s Guide
EN 60825-2 Safety of Laser Products Part 2: Safety of Optical Fiber Communication Systems
FDA Regulation 21 CFR 1040.10 and 1040.11
Storage temperature - –40° to 65°C
Dimensions - 43.5 x 434 x 407mm
Weight - 6 kg

(1) Ethernet Switch
(2) Power Cords
(1) Set of Rack Rails
(1) Information Sheet
(1) Console Cable RJ45 to DB9F
(1) Grounding Lug/Hardware